Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Assembling and Installing Your Gate
NOTE: You will notice a slight gap between the gate door latch and the
frame. This is not a defect. Your gate is a pressure mounted gate and this
gap will disappear once you tighten your gate in its opening.
STEP 1
Locate the (4) threaded
spindle rods. Rotate the
adjustment wheels along
the threading, eliminating the
gap between the adjustment
wheel and the rubber foot.
ADJUSTMENT WHEEL
RUBBER FOOT
STEP 2
Insert the (4) threaded
spindle rods into the holes
at each of the four corners
of the gate.
English
7
Publicité
Table des Matières
