Completed Co 2 Tank Installation - NOSTALGIA PRODUCTS Kegorator KRS2100 Serie Manuel D'instructions

COMPLETED CO 2 TANK INSTALLATION

Tap Tower Hose
(connects Beer Tap
to Keg Coupler)
Large Butterfly Nut
(secures Tap
Tower Hose to Keg
Coupler)
Keg Coupler
Handle
Connects to Keg
DANGER! CO 2 can be dangerous! CO 2 cylinders contain
high-pressured gas, which can be hazardous if handled
improperly. They must be handled with care.
Location of Temperature Gauge
The temperature gauge is located in the rear of the KEGORATOR™ in the lower left-
hand corner. NOTE: Before purchasing a beer keg, allow the unit to cool for 48 hours.
MAX = Increases Coolness
MIN = Decreases Coolness
OFF = Turns Off
11
Double
Regulator
CO 2 Tank Band
CO 2 Tank
CO 2 Line
(connects
Regulator to side
of Keg Coupler)