Proper Use; Technical Data; Before Starting The Equipment - EINHELL CE-JS 8/1 Instructions D'origine

Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
•
Jump start power bank
•
Jump start cable
•
3-in-1 USB connection cable (Micro/Mini/C)
•
USB high-speed charger cable
•
Storage case
•
Original operating instructions
•
Safety instructions

3. Proper use

The jump start power bank is designed for char-
ging smart phones, cameras, tablets, etc. It can
also be used as a torch light. Used with the sup-
plied jump start cable the equipment can also be
used as a support for 12 V starter batteries (lead
acid batteries) in motor vehicles with maximum
petrol engine capacities of 3000 ccm.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
Anl_CE_JS_8_1_SPK9.indb 16 Anl_CE_JS_8_1_SPK9.indb 16
GB

4. Technical data

Jump start power bank
Li-Po battery: .......11.1 V – 2500 mAh – 27.75 Wh
Micro USB inlet "IN: 5V/9V":
................................................ 5 V d.c./3 A (max.)
............................................... 9 V d.c./2 A (max.)
Charging time 5V/1A, approx.: ....................... 7 h
Charging time 5V/2A, approx.: ....................... 4 h
Charging time 5V/3A, approx.: ....................... 2 h
Charging time 9V/2A, approx.: .................... 1.5 h
USB outlet "OUT: "5V/2A": 5 V DC / 2 A (max.)
USB outlet "OUT:"5V/9V":
............................................... 5 V d.c./3 A (max.)
............................................... 9 V d.c./2 A (max.)
Jump starting
current: .................... 200 A (5 sec) / 400 A (max.)
Ambient temperature
for jump starting: ....................... + 15 °C - + 40°C
Storage temperature: ................. + 5 °C - + 40 °C
Protection class: ................................................III

5. Before starting the equipment

5.1 Charging the jump start power bank
(Fig. 3)
You can charge up the jump start power bank
on any standard USB outlet (e.g. the charger of
a smart phone). Check that the voltage on the
rating plate is the same as your supply voltage
before you connect the USB charger. We recom-
mend that you charge up the equipment every 4
months.
Important! Pull out the power plug before making
adjustments to the equipment.
Observe the enclosed safety information with de-
tailed information about charging.
The outlets must not be used while charging is in
progress.
•
Connect the USB charger to the Micro USB
inlet. Use the supplied USB cable (Fig. 2a) to
do so.
•
Plug the charger into the socket outlet and the
battery will be charged. The LEDs of the LED
battery capacity indicator shine (flash) during
charging and indicate the charging status.
When charging is finished, all the LEDs shine.
- 16 -
08.02.2021 08:43:17 08.02.2021 08:43:17