TCL H8W25WQ Manuel De L'utilisateur page 18

Mode Selection
Timer
(On Remote Control)
Eco
(On Remote Control)
Press repeatedly to cycle through
Cool, Dry, Fan, and Auto modes.
• The AC cools the room to the set temperature.
• Temperature and fan speed are adjustable.
• The AC works as a dehumidifier to remove excess humidity in
the air. The fan runs constantly but at a low speed.
• Temperature and fan speed are not adjustable.
• The AC circulates air like a normal fan. Remember to keep
the vent open during the fan function but closed during the
cooling function to maximize the cooling efficiency.
• Fan speed can be adjusted to Low, Med, and High.
• Temperature cannot be adjusted.
• The AC adjust between Cool and Fan modes automatically
based on the room's temperature.
• Temperature and fan speed cannot be adjusted.
When the air conditioner is on or in standby, press the Timer
button and its icon will flash on the LED display. During the
flashing process, press + or - to select a timer from 0 to 24
hours, then press the Timer button again to confirm the setting.
After the timer ends, the air conditioner will start/stop running
Turning the air conditioner ON or OFF at any time or adjusting
the timer setting to 0.0 hour will cancel the timer program.
In Eco mode, when the desired temperature is reached, the
compressor will turn off and the fan will continue to run for 3
minutes before turning off.
The fan will turn on for 1-minute at every 5-minute interval until
the room temperature is above the set temperature, at which
time the compressor turns back on and continues cooling.
18
Cool Mode
Dry Mode
Fan Mode
Auto Mode
automatically.