Behringer SD16 Mode D'emploi page 7

Boîtier de scène numérique 16 preamplis midas commandable à distance et 8 sorties, aes50 networking et hub ultranet
Table des Matières

Publicité

12
SD16/SD8
SD16/SD8 Hook-up
(3) (4)
(5)
(7)
(6)
(3) (4)
(5)
(6)
(7)
(1)
(2)
(9)
(8)
(1)
(2)
(8)
13
Quick Start Guide
Step 2: Controls
(EN)
(1)
MIDAS-designed mic/line
combo inputs accept balanced
XLR and 1/4" male plugs.
Channel 15 and 16 on the SD16
and channel 7 and 8 on the
SD8 accept high impedance
signals for direct connection
of guitars and basses.
(2)
XLR outputs accept balanced
XLR female plugs.
(3)
POWER LED lights when the
unit is powered on.
(4)
AES50 LEDs light green
when the corresponding
AES50 port is connected
and synchronized, and light
red when connected but
not synchronized.
(5)
ULTRANET ports allow direct
connection of up to 4 (SD16)
or 2 (SD8) P16-M personal
mixers. The ports provide
phantom power, allowing
the P16-M units to operate
without additional power
supplies.
(6)
USB port can be used to
connect a PC for updating the
firmware.
(7)
AES50 ports A and B allow
connection to a SuperMAC
digital multi-channel network
via shielded Cat-5e Ethernet
cable with terminated ends
compatible to Neutrik
etherCON.
NOTE: The clock master,
typically the digital mixer,
must be connected to the
AES50 port A, while additional
stage boxes would be
connected to port B. See 'Step
3: Channel Management'
for details.
(8)
OUTPUT select switch
determines which group of 8
AES50-A channels appear at
the physical XLR output jacks.
When using multiple stage
boxes, this allows different
output signals to be sent to
each unit.
(9)
POWER switch turns the unit
on and off .

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Sd80020110275

Table des Matières