Table Des Matières; Introduction; Safety Notes - Imetec N5001 Instructions D'utilisation

Dear customer, thank you for choosing our product. We feel certain you will appreciate its quality and
reliability as it was designed and manufactured with customer satisfaction in mind. These instructions
for use are compliant with the European Standard EN 82079.
WARNING! Instructions and warnings for safe use.
Before using this appliance, carefully read the instructions
for use and in particular the safety notes and warnings, which must
be complied with. Keep this manual together with its illustrative
guide for future consultation. Should you transfer the appliance to
another user, make sure you hand over this documentation as well.
NOTE: should any part of this manual be difficult to understand or
any doubts arise, contact the company at the address indicated on
the last page before using the appliance.
NOTE: persons with impaired vision may consult these instructions
for use in digital format at the website www.tenactagroup.com
Introduction
Safety notes
Key to symbols used
Description of the appliance
and accessories
Preparation
Use
• After unpacking, make sure the appliance is intact, complete with
all its parts as shown in the illustrative guide and with no sign of
damage. If in any doubt, do not use the appliance and contact an
authorised service centre.
CAUTION! Remove any communication material such as labels,
tags etc. from the appliance before use.

INTRODUCTION

CONTENTS
page 12 End of use
page 12 Maintenance
page 15 Troubleshooting
Disposal
page 15
Support and warranty
page 16
Illustrative guide
page 16
Technical data

SAFETY NOTES

EN
page 18
page 18
page 20
page 21
page 21
page I-II
page III
12