Erge KHT 30-2 Instructions De Montage Et D'utilisation page 27

(mm)
47
280
Instructions for assembly
Bracket
• Insert the hob and align it.
• From the bottom, insert the brackets
with screws in the holes provided
for fastening the brackets, align the
brackets and screw them tight.
• Tighten the screws with a hand screw
driver only; do not use a battery-ope-
rated screw driver.
• In the case of thin worktops make
sure that the brackets are correctly
positioned.
Important:
There is a risk of breakage
if the hob is canted or subjected to
stress during installation!
Minimum distance to adjacent walls
Cutout dimensions
Outer dimensions of the hob
Cable routing in rear wall
Installation height
GB
27