Safety Information - Kobalt SGY-AIR84TZ Mode D'emploi

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate
or install the product. If you have any questions regarding the product, please call
customer service at 1-888-3KOBALT, 8:00 a.m.-8:00 p.m., EST, Monday-Friday.
FOR YOUR OWN SAFETY READ AND UNDERSTAND THE OWNER'S MANUAL
BEFORE USING ITEM. FAILURE TO OBSERVE AND FOLLOW THE BELOW
SAFETY INSTRUCTIONS COULD RESULT IN INJURY.
WEAR PROPER PROTECTIVE GEAR
Keep loose hair, loose clothing, or any hanging jewelry away from all moving parts.
Wear protective safety glasses or face shield to protect eyes.
To reduce the risk of hearing damage ensure you use proper ear protection to
safeguard your hearing.
Dress properly and wear protective clothing when needed.
Whenever possible, it's recommended that electrically non-conductive clothing and
non-skid footwear be worn when using tools.
KEEP CHILDREN AWAY FROM WORK AREA AND TOOL
Keep tool out of reach of children and never allow children to handle equipment or tool.
Keep work area clear from clutter and other work hazards.
Do not use this product in unsafe work conditions.
WORK ENVIRONMENT HAZARDS
Be aware that extension cords and air hoses may present tripping hazards.
Always be aware of your work area surroundings and the people around the work area
to ensure your safety.
Do not operate tool if damaged during shipping, handling, or unsafe transportation of
item.
Using a damaged or unsafe tool can result in serious injury, death, and/or property
damage.
Always check air hoses for weak or worn connections before each use and make
certain that all connections are secure.
Repetitive motions, awkward positions, and exposure to vibration can be harmful to
hands and arms.
Keep hoses away from heat, oil, and sharp edges. Check hoses for weak or worn
connections before each use and make sure that all connections are secure before use.
Never spray in vicinity of flammable materials, open flame, or near ignition sources.
Never store flammable liquids or gases near air compressor or other compressed
materials under pressure.
ADDITIONAL SAFETY GUIDELINES
Every tool has a unique function and is designed to operate in a specific way.
Only use a tool for its intended function.
Always read the label or materials safety data sheet for the materials and/or chemicals
that may be used before you use an item to ensure its safe.
3