Kozy-World EIR1123 Instructions D'installation Et Manuel Du Propriétaire page 9

2. The Clock setting :
Press the "CLOCK" button, the figure shown on clock will
flash. Press or
been set, press the "CLOCK" button again to set the
minutes. After the minutes has been set, press the "CLOCK"
button, the clock will indicate the set time.
3. The Timer setting :
Press the "TIMER" button, the word "TIMER" will appear on
the transmitter, next press
add 30 minutes increments press the button again. After
the timer has been set, press "TIMER" button again, the
word "TIMER" will flash and the timer will return to time.
4. Key-Press Lock setting (child proof):
To lock, press the "LOCK" button, there will be a
which means that the transmitter is in a lock position. To
unlock, press once immediately followed by pressing
the "LOCK" button .
5. Heating Level setting
Select the MANUAL model and press SET to chose the
heating level setting, the "
press or to select full, half or no heating.
(Adaptor NOT permitted in Canada)
Under CZ22.2 NO. 0 standard
to set the hour. After the hour has
or to adjust the time, to
" symbol will flash. Then
6. Flame Effect setting:
(1) Flame speed
After selecting MANUAL mode or AUTO mode, the
flame symbol will flash, for slow flame effect, press
button, for faster flame effect, press
(2) Flame brightness
Press "SET" button, when the lamp symbol flashes,
press
and button to increase the flame brightness.
7. For Flame Effect only:
Select MANUAL mode, then set the Heating level to
no heating level or select AUTO mode and then set
temperature to lowest setting.
symbol,
8. Manual ON/OFF button
If you can't find your Remote Control or the Remote
Control is damaged, you can use manual ON/OFF
button to manual turn on/turn off your heater.
8
9
button to decrease the flame brightness
button.