MAINTENANCE OF MOTORS
The motors used on the fan and flame genera-
tor assembly are prelubricated for extended
bearing life and require no further lubrication.
However, periodic cleaning/vacuuming of the
fan/heater unit is recommended.
WARNING: Make sure that the
power is turned off before
proceeding.
Any electrical repairs or rewiring of this unit should be carried out by a licensed electrician in accordance
with national and local codes.
If repairing or replacing any electrical component or wiring, the original wire
routing, color coding and securing location must be followed.
Wire Gauge:
Power Cord
Heater Element
Other Wire
ELECTRICAL WIRING DIAGRAM
14AWG
16AWG
18AWG
GLASS INFORMATION
1. Under no circumstances should this product be
operated with missing or broken glass.
2. Do not strike or slam the glass.
3. Do not use abrasive cleaners to clean the glass.
4. Replacement glass is available from the manu-
facturer and replacement should be carried out
by a qualified service person.
Model: EIR1123, EIR2123
Voltage:
120 VAC, 60 Hz
Total Amps:
11.5 Amps
Total Watts:
1380 Watts
Heater Rating: 1200 Watts
6
7