Indicator Lights - Windsor AXCESS Serie Mode D'emploi

Operations

Indicator Lights

The electronic brush control constantly monitors the
status of the brush, communicating the status through
the lights on top.
Green On/Off Light: Brush is on and spinning.
Red Light: The brush is not fully engaged in the
carpet. The height adjustment should be lowered. If
the height adjustment is at its lowest setting, the
brush is worn and needs to be replaced.
NOTE: Recommend selecting a brush height that is
only one level beneath that at which the green and
red lights are on.
Red Light Flashing: The brush is blocked. Turn off
the power head, disconnect it from the power source,
and then remove the blockage.
12 86404610 Axcess