Power Head; Foot Pedal - Windsor AXCESS Serie Mode D'emploi

Important instructions for use on the power head.
The brush roller is off and stopped when the machine
is in the upright position and the handle is completely
locked in place.
NOTE: If you have the machine handle at an angle,
the brush roller will spin.
Leaving the machine in a stationary position for an
extended period of time while the brush roller is
spinning may cause damage to your carpet.
Recommended items to be aware of with regard to
your vacuum:
• Be sure NOT to allow carpet edges or fringe
into the brush.
• This machine could cause damage to loosely
woven carpets or rugs, wool loop carpets,
long piled carpets, or very soft and sensitive
floor coverings.
• We do NOT recommend using the power
head to clean old or especially valuable hand-
crafted carpets.
• If you have uneven flooring, the metal part
underneath the machine may scratch the
surfaces.
• Please carry the machine over high thresh-
olds.

Power Head

The rotating design of the swivel neck allows the
power head to move in any direction, making it easily
maneuverable around obstacles.
The power head also has an adjustable brush height
and to-the-edge brush action for effective all around
cleaning.

Foot Pedal

By pushing the foot pedal and lowering the handle,
you activate the power head and the brush begins
spinning.
Failure to use the Foot Pedal will cause damage to
the unit.
86404610 Axcess
Operations
11