Assembly; Machine Operation - Windsor AXCESS Serie Mode D'emploi

Operations

Assembly

Please read all instructions before using this
machine.
1. Carefully attach the brush nozzle to the vacuum
cleaner through the fitting at the bottom of the
vacuum until it locks. [See below]
2. Push the black end of the hose [A] into the
connection on the filter cover [B].
3. Insert the hose handle [C] into the suction
opening on the side and press the hose into its
place on the side of the machine, as shown.

Machine Operation

Your vacuum is operated with an electric power
brush. The machine can be used in the upright
position.
When locking the vacuum in the upright position,
please ensure the bag housing is clicked in place;
face forward to the center, or the unit could overturn.
Please ensure that the On/Off switch is in the OFF
position. Turn the cable hook to release the power
cable and plug into the walls main outlet.
Now you may start your machine by moving the
power switch to the ON position.
To use the power head (12" or 15" model):
1. Press the foot pedal [D] on the rear of the power
head and lower the machine handle to an angled
position. The brush motor will then turn on.
10
When using the hose and attachments, keep the
machine in upright position.
The hose handle can be removed from he side of the
vacuum and can be used with or without attachments.
Also maintain a grasp on the machine when using the
hose as it could tip if the hose is pulled too far.
The machine can also be used without the power
head. You can easily carry the machine by using the
carrying handle.
When you have finished using the machine, turn it off
by moving the power switch to the OFF position. Then
unplug the power cable and wind it into the cable
hook and handle.
86404610 Axcess