Storing The Magnifier Cover; Positioning; Adjusting The Support; Connection - Hoffmann GARANT Manuel D'utilisation

2.3 STORING THE MAGNIFIER COVER

While using the magnifier, you can store the
magnifier cover on the light support.
Abb. 3: Storing the magnifier cover.
Clamp the magnifier cover to the light sup-
port, siehe Fig. 33.

3. Positioning

3.1 ADJUSTING THE SUPPORT

VORSICHT
Risk of injury caused by a falling or tilt-
ing light.
Personal injury and material damage.
Hold the light head when unscrewing
the pivot screws.
After positioning the support, tighten
the pivot screws.
ACHTUNG
Material damage caused by wrong han-
dling.
Damage to the light.
Do not move the joints opposite to
the intended direction of rotation.
Abb. 4: Joint and pivot screw.
Place the light in the desired position.
Tighten the pivot screw until the light is
fixed in the desired position.

4. Connection

ACHTUNG
Material damage caused by wrong
mains voltage.
Damage or destruction of the light.
Check whether the mains voltage
4.1 CONNECTING THE LIGHT TO THE
Plug the plug-in power supply unit into
a socket.
www.hoffmann-group.com
matches the nominal voltage and
the frequency specified on the rating
plate and make sure that they match.
POWER SUPPLY
DE
EN
FR
IT
ES
13