1.3 WARNING LEVELS
GEFAHR
Warnings against hazards that result directly
DE
in serious injuries or death in case of non-
observance.
WARNUNG
Warnings against hazards that may result
in serious injuries or death in case of non-
observance.
VORSICHT
EN
Warning against hazards that may result in
injuries in case of non-observance.
ACHTUNG
Warning against hazards that may result in
material damage in case of non-observance.
2. Mounting
FR
VORSICHT
Risk of injury caused by a falling or tilt-
ing light.
Personal injury and material damage.
Mount fastening elements correctly.
2.1 MOUNTING THE FASTENING
ELEMENT
IT
General
The lamp is designed for use as a mobile lamp.
If not properly secured, the lamp may tip over
or fall down.
Use suitable aids to attach the lamp to the
selected installation surface so that it can-
not fall down.
Route the cable so that it cannot become
damaged!
ES
12
Attachment elements
The lamp should be attached to the selected
surface using suitable accessories.
Suitable methods of attachment include a
table clamp supplied with the lamp, see Fig. 1.
Abb. 1: Mounting the fastening element.
2.2 MOUNTING THE MAGNIFIER
COVER
VORSICHT
Fire risk when the magnifier is not cov-
ered and exposed to sunlight.
Personal injury and material damage.
When the magnifier is not used, cover
it with the magnifier cover.
Abb. 2: Mounting the magnifier cover.
Compress the upper part of the magnifier
cover, siehe Fig. 22.
Place the magnifier cover on the magnifier
from above and release the cover.
The magnifier cover is clamped to the light
head.