Description (Fig. A); Installing And Removing The Battery Pack - DeWalt XR FLEX VOLT LI-ION DCV586M Traduction De La Notice D'instructions Originale

EnGLIsh
Markings on Dust Extractor
The following pictograms are shown on the dust extractor:
Read instruction manual before use.
Pairing symbol.
Ø Ø
Hose diameter switch postions.
20 32
Acoustic alarm
Low battery alarm
Flow rate alarm
<20m/s

WARNING: This machine contains dust hazardous to
health. Emptying and maintenance operations, including
removal of the dust collection means, must only be carried
out by authorised personnel wearing suitable personal
protection. Do not operate without the full filtration
system fitted.
Class M dust extractors are suitable to extract dry, non-
combustable dusts with workpace limit values of ≥ 0.1 mg/m³.
Date Code Position (Fig. A)
The date code , which also includes the year of manufacture,
22
is printed on top housing under handle.
Example:
2018 XX XX
Year of Manufacture

Description (Fig. A)


WARNING: Never modify the dust extractor or any part of
it. Damage or personal injury could result.
Battery port
1
2 Dust extractor hose
Three position switch
3
Tank latches
4
5 Hose clips
Dust extractor head
6
Battery pack
7
8 Hose release latch
Hose inlet plug
9
38
TSTAK stacking latches
10
11 Wireless Tool Control
pairing button
Fleece bag
12
Handle
13
Wireless Tool Control
14
remote
Hose selection switch
15
Intended Use
This industrial dust extractor cleaner is intended for wet and dry
vacuum cleaning applications.
The appliance can operate cordless by using the D
Li-ion batteries.
The dust extractor can be used with a D
system or as a stand alone unit on the floor.
The DCV586M is suitable for picking up dry and non-flammable
dusts, liquids, wood chips, mineral dusts containing quartz and
hazardous dusts with exposure limit values (e.g. MAK or AGW
values) greater than or equal to 0.1 mg/m³ (dust class M as per
IEC/EN60335-2-69).
DO nOT pick up materials that present a risk of explosion,
glowing or burning materials, flammable materials, gases or
other hazardous substances.
DO nOT suck up oil, liquids with a temperature of over 32 °C,
aggressive or flammable liquids.
DO nOT use the dust extractor in explosive atmospheres.
DO nOT use the dust extractor without dust bag.
nOTE: This appliance is suited for professional and commercial
use, e.g. in hotels, schools, hospitals, factories, shops, offices,
rental companies, and on construction sites.
DO nOT let children come into contact with the dust extractor.
Supervision is required when inexperienced operators use
this dust extractor.
• Young children and the infirm. This appliance is not
intended for use by young children or infirm persons.
• This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills.
Children should never be left alone with this product.
ASSEMBLY AND ADJUSTMENTS

WARNING: To reduce the risk of serious personal
injury, turn dust extractor off and disconnect battery
pack before making any adjustments or removing/
installing attachments or accessories and if the
dust extractor head is removed from the tank or
not latched securely. An accidental start-up can
cause injury.

WARNING: Use only D
E

Installing and Removing the Battery Pack

(Fig. B)
nOTE: Make sure your battery pack
1. To install the battery pack into the vaccum, insert/slide
battery pack into battery port
is fully seated.
2. To remove the battery pack from the dust extractor,
press and hold the battery release
pack and remove. To charge the pack, insert it into your
D WALT charger.
E
WALT 54V
E
WALT TSTAK transport
E
WALT battery packs and chargers.
7 is fully charged.
1 . Make sure the battery pack
23 on the battery