General Precautions; Recommendations For Installation; Recommendations For Use - Nice MOTB Instructions Et Avertissements Pour L'installation Et L'utilisation

ENGLISH
RECOMMENDATIONS AND
1

GENERAL PRECAUTIONS

1.1 - Recommendations regarding safety
• ATTENTION! – This manual contains important instructions and recom-
mendations regarding the safety of persons. Incorrect installation can
cause serious injury. Read the manual completely before starting work. If in
doubt, suspend the installation and request clarifications from the Nice After-
sales Assistance.
• ATTENTION! – Important instructions: keep this manual for any future
maintenance interventions and product disposal.

1.2 - Recommendations for installation

• Before installation, check that this product is suitable for the use desired (see
"Limits of use" and "Product technical features"). If it is not suitable, DO NOT
proceed with installation.
• Handle the product with care during installation, preventing crushing, blows,
falls or contact with liquids of any nature. Do not place the product near to
heat sources or expose it to naked flames. All of these actions can damage it
and be cause of malfunctioning or dangerous situations. If this occurs, sus-
pend installation immediately and contact the Nice After-sales Assistance.
• Do not modify any product parts. Unauthorised operations can only cause
malfunctioning. The manufacturer declines liability for damage deriving from
arbitrary modifications to the product.
• The product is not destined to be used by persons (including children) with
reduced physical, sensorial or mental capacities or with no or little experience
and knowledge, unless they have been able to benefit by surveillance or training
regarding use of the product by means of a person responsible for their safety.
• The product cannot be considered an absolute protection system against
intrusion. For more efficient protection the automation must be integrated
with other safety devices.
• The product packaging material must be disposed of in compliance with local
legislation.

1.3 - Recommendations for use

• Use a soft, damp cloth the clean the surface of the product. Use water only;
do not use detersives or solvents.
English – 1