Connecting Your Photo Frame To The Wi-Fi Network; Automatic Wi-Fi Connection (Livebox Only) - AgfaPhoto AF5080W Livret Utilisateur

Connecting your photo frame to the Wi-Fi network

The Wi-Fi connection can be configured using the Livebox easy Wi-Fi function (automatic
detection) or manually.

Automatic Wi-Fi connection (Livebox only)

1. Set your Livebox to association mode by pressing the REG, 1 or Wi-Fi button for at
least 5 seconds.
2. Select Livebox easy Wi-Fi on the photo frame installation screen using the
keys on the remote control.
3. Press the OK button to validate your choice.
The connection procedure is launched. The operation will take approximately two
minutes.
A screen informs you that the photo frame is connected to the Livebox. Select Validate
4.
using the
8 User Guide
For further information on activating the association mode
Note
on your Livebox (finding and identifying the button), please
see the Livebox user guide.
and keys on the remote control then press the OK button.
If the connection fails, see the following paragraph to
Note
configure the connection manually.
and