Zeiss SYCOP 3 Mode D'emploi page 6

ZEISS
4 NOTES ON WARRANTY
The manufacturer guarantees that the instrument is free of material or manufacturing defects upon
delivery. Any defects must be reported immediately and steps taken to minimize damage. If such a defect
is reported, the instrument manufacturer shall be obliged to correct the fault, either by repairing the
instrument or replacing it with a new one, at the manufacturer's discretion. No warranty is given for
defects caused by natural wear and tear (particularly of wearing parts) and improper use of the
instrument.
The instrument manufacturer shall not be liable for damage caused by misuse, negligence or any other
tampering with the instrument, particularly the removal or replacement of instrument components, or
the use of accessories from other manufacturers. Such actions shall invalidate any warranty claims.
With the exception of the work described in this quick reference guide, no maintenance or repair work is
to be carried out on the SYCOP 3. Repairs may only be performed by ZEISS Service or individuals specially
authorized by ZEISS Service. In the event of a problem with the instrument, please contact your local
ZEISS representative.
5 INTENDED USE
With the SYCOP 3 system control panel and the EMS 3 controller required for it, the following stereo and
zoom microscopes can be operated:
− SteREO Discovery.V12/V20,
− SteREO Lumar.V12,
− Axio Zoom.V16.
The correct operation of the above microscope systems is essential for their safe and successful
functioning. Before setting up, putting into operation and utilizing the SYCOP 3, be sure, therefore, to
carefully read this Operating Manual and the relevant operating manuals for the microscopes connected
and for other components and accessories that may be used with them and to make yourself thoroughly
familiar with their contents.
Keep the operating manuals in a place where all the users can, at any time, access the information
required for the use of the microscope system.
CAN components connected to the system are controlled and monitored via joystick, scroll wheels,
pushbuttons, (optional) footswitches and touchscreens.
4
NOTES ON WARRANTY
435611-6044-008
SYCOP 3
09/2017