Maintenance And Cleaning - Peach PL120 Mode D'emploi

6. The completed laminated pouch is ejected from the
pouch ejector slot ❻ . Make sure there is enough free
space in front of the device to let the pouch exit without
obstruction. Allow the laminated pouch to cool down for
at least one minute before touching it.
Jammed pouches
In case the pouch may be pulled in at an angle or jam
itself inside the device please proceed as follows.
1. Press the anti-blocking switch ❼ and the transport of
the pouch will be stopped.
2. The laminate pouch is not pulled in any further.
3. Remove the laminating pouch by hand
4. Re-start the laminating process.

Maintenance and cleaning

Unplug the appliance from the wall outlet. Allow the unit
to cool down. The outside of the unit can be cleaned with
a damp cloth. Do not use solvents or flammable materials
for cleaning. To clean the internal parts of the unit from
possible contamination, a matte cardboard of approx.
2
250 g/m or a special blotting paper can be used. Run the
sheets through the warm machine to remove any residue
from the rollers.
Disposal
Guideline 2012/19/EU concerning the
handling, collection, recycling and
disposal of electrical and electronic
equipment and their components ('waste
electrical and electronic equipment',
known as WEEE).
The crossed symbol on a waste container indicates
that the machine or appliance must not be disposed
of with household waste, but must be handed over to
an appropriately equipped collection point for proper
disposal.
Directives
We declare that this device has been
manufactured in accordance with the
applicable rules and regulations.