Zibro P 622 Manuel D'utilisation page 67

8 8 8 8 : : 88
Press or to adjust the hour.
2
Press the push button again, the 2 right digits of the 4 digits are flashing.
3
Press or to adjust the minutes of the clock in intervals of 5 minutes.
4
The timer is set. After 10 seconds the time display returns.
Repeat the above procedure while the digits are still flashing for setting the
5
OFF.
The circular time scale will be OFF between the 00:00 time to the timer time ON,
and from the time OFF until 24:00. The flashing bar on the time scale indicates the
real time and moving a phase every 30 minutes ahead. The unit will operate
according to the timer setting daily.
After a power failure (e.g. after plug out of the wall socket) you have to program
the timer setting again.
7. CANCELLING THE TIMER FUNCTION
In order to cancel the timer programming press the
then it will return to the time display. The daily mode will be cancelled as well.
The black segments in the circular time scale will disappear.
8. AIRFLOW
Direct the airflow by adjusting the grill on top of the air conditioner. Move the
grill, by pushing or pulling, in the middle (see illustration). This to avoid a false
position of the grill. Adjusting the airflow is as well possible by moving the
direction of the vertical louvers.
9. SLEEP MODE FUNCTION
The sleep mode function adjusts the set temperature of the unit to the thermal
needs of the body falling asleep as follow:
• In the COOL or AUTO COOL mode
The set temperature will increase 1ºC after 1 hour and a further 1ºC after 2
hours.
• No FAN mode under SLEEP mode operation
• Default fan speed: LOW
Press the push button to operate the sleep mode.
1
Press the push button again in order to cancel the sleep mode.
2
push button momentarily,
4
67