Transport And Storage - Protac SenSit Mode D'emploi

Protac accepts no liability for damages resulting from incorrect washing and maintenance.
• Do not wash the inner bag with balls
• Do not wash the inner bag in the neck rest
Maintenance
Over time a recess will form in the seat as the small balls at the bottom 'settle' through use.
It is therefore important to turn the chair upside down once in a while and shake it a little to
allow the balls to become evenly distributed again. This will restore the shape of the seat.
Inspect the chair for defects and deficiencies prior to each use, and inspect the chair's seams,
zips, fabric, straps, balls and general condition once a year. If serious defects or deficiencies are
discovered, the Protac SenSit chair must not be used until the defects have been repaired and
safety has been restored.

Transport and storage

It is easy to move the Protac SenSit
the chair.
The chair should preferably be lifted by two people
using one strap each.
When moving the chair, do not lift but pull on the
straps as this puts less strain on the back. However, if
moving the chair over a distance of more than two
metres, the chair should be lifted to prevent unnecessary
wear to the fabric.
The Protac SenSit chair is ready to use on delivery.
®
During transport, the chair is wrapped in protective plastic in a cardboard box, which protects
the chair against dirt and moisture.
The chair must be stored in a safe place when not in use, preferably covered to protect it
against dirt and moisture.
Disposal
The Protac SenSit chair can be divided into the following components for waste disposal pur-
®
poses: Plastic and fabric.
All parts of the chair can be disposed of as flammable waste.
Waste must be disposed of in accordance with applicable rules.
Warranty
There is a two-year warranty against manufacturer's defects.
chair using the two carrying straps fitted on each side of
®
DK
GB
DE
FI
FR
NL
SE
ES
IT
17