Controls And Functions - Mx Onda MX-PG2200 Manuel D'utilisation Et D'installation

CONTROLS AND FUNCTIONS

1
1. Large cooking zone (Triple ring)
2. Medium cooking zone (Semi fast)
3. Small cooking area (Auxiiar)
4. Controls of the cooking zones
5. Electric ignition
6. Safety sensor: Activated if the flame is accidentally
off (spills, drafts, etc.), interrupting the gas supply
to the burner.
USE OF THE GAS HOB
The position of each cooking zone is indicated in the lower part of the
corresponding control,
. small cooking zone.
The cooking zones are different in size and power. Choose the most suitable
area for the diameter of the container used, and adjust the flame or heat power
according to your taste or preference.
Turning ON/OFF a cooking zone
Press and hold for approximately 6 seconds the button corresponding to the
chosen cooking zone (the electric start will start to work) and turn it
counterclockwise to the maximum flame level (
the button and the flame will stay lit in the position of maximum flame level or
maximum heat power.
To decrease or increase the level of the flame or heat output, turn the knob
counterclockwise to the position (
( ) maximum flame level.
To switch off a cooking zone, turn the corresponding button clockwise to the
OFF position.
large cooking zone,
) minimum flame level or to the position
4
medium cooking zone and
), after this time stop pressing
2
3
4