Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
2. THE LASER LIGHT BEAM
used in this system is Class II with maximum 1 mW and 650 nm
wavelengths. AVOID DIRECT EYE EXPOSURE.
3. THE LASER MUST BE USED AND MAINTAINED IN ACCORDANCE
WITH THE MANUFACTURER'S INSTRUCTIONS:
• Never aim the beam at any person or an object other than the
workpiece.
• Do not project the laser beam into the eyes of others.
• Always ensure the laser beam is aimed at a workpiece without
reflective surfaces as the laser beam could be reflected into your
eyes or the eyes of others.
UNPACKING
WARNING! Do not attempt to assemble the tool, plug in the power
cord or turn on the switch if any parts are damaged or missing. Failure to
heed this warning could result in serious personal injury.
CONTENTS
Separate all parts from the packing materials and check carefully against
fig 2 & 3 and the list below.
NOTE: Make certain all parts are accounted for before discarding any
packing material.
Some items below may be packed already assembled to each other.
a
Table assembly
b
Column assembly
c
Manual
d
Loose parts box
e
Base
f
Head assembly
g
Loose parts bag
h
2 x AA batteries
i
4 x hex bolts
!
j
Allen wrench
k
chuck safety guard
l
2 x V-belt
m
Table hand crank
n
Table support lock handle
o
Drift key
p
Pulley cover knob
q
Chuck key
r
Chuck
s
Idler pulley
t
3 x feed handles
141219
11
Publicité
Table des Matières
