Basic Principle - Weber Rescue Systems STABFAST MK2 ALU Manuel D'utilisation

10 | English
Product information and instructions
The StaBFast MK2 ALU universal stabilisation system can be used on all types of cars, MPVs, minibuses and
®
lorry cabins. in any (unstable) position and on any surface.
The system makes use of the inherent mass of the vehicle to be stabilised. Once the vehicle is stabilised, the
system will not obstruct the rescue of casualties, and the vehicle is prevented from moving. The stabilised
vehicle is therefore no longer a danger to the casualty or the emergency services.
IMPORTANT
The StaBFast MK2 ALU stabilisation system is not suitable for lifting or moving weights. The straps must not be
®
tightened so far that the vehicle is lifted off the ground. The vehicle is stable as soon as the straps are taut. Do
not tighten the straps any further.

Basic principle

Extend the stabililser strut and place it at an angle of 30° to 50°. Attach the hook on the strap to a firm
point as low as possible on the vehicle. Now tighten the strap using the ratchet on the stabiliser strut. This
automatically forms a triangular shape, causing a small proportion of the mass of the vehicle to be shifted to the
foot of the stabiliser strut. This distributes the mass of the vehicle over a broader area. This triangular shape is
the basic principle of the StaBFast
In 3 heights adjustable wedge
Tie down strap – free-running spin-button
Tie down strap - retractor
Tighten/release the ratchet in four positions
1.
Transport and lock
MK2 ALU stabilisation system.
®
Pneumatic cushioning at retraction
7 height slots
2.
Tighten
Automatic lock/
manual release
Hook
3.
Release
Hook blade
Ground anchor opening
Tie down strap fastener
4.
Neutral