turck FTCI LI-UP8X Serie Manuel D'instruction page 7

Parameter
0 Cod
1 USP
2 SP
hS
3
OU
4
5 dS
dr
6
7 nFi
8 GLY
9 CAL
10 Cod
Technical data (s. also page 10)
Operating voltage: 24 ± 10 % VDC
Current consumption:
Switching output:
Switching current:
Aalogue output:
Last R :
L
Operating range:
depending on device (s. page 10)
Temperature monitoring:
Parameterisation
Switch-on delay:
Switch-off delay:
Availability time:
Response time:
Housing material:
Flow rate display: 7-segments/3 digits
Connection: 4-pole, M12 x 1
Disposal
Devices must be properly disposed of, not in general household waste.
Manufacturer and Service
Turck supports you with your projects, from initial analysis to the commissioning of your application. The Turck product database contains
software tools for programming, configuration or commissioning, data sheets and CAD files in numerous export formats. You can access the
product database at the following address:
Should you have any further questions, please contact the sales and service team in Germany on the following telephone numbers:
Sales: +49 208 4952-380
Technology: +49 208 4952-390
Outside Germany, please contact your Tûrck representative.
Hans Turck GmbH & Co. KG
Witzlebenstraße 7
45472 Mülheim an der Ruhr
Germany
2016/12
Parameter value Function
0...255 Enter access code Factory setting 0
L or °C Unit switch point S1 [l/min oder °C]
MIN +0,2...MAX Adjustable range switch point S1 [l/min or °C] (see page 10)
or -9...90
0,2...2/5/10
Hysteresis switch point S1 [l/min or °C] (see page 10)
or 1...10
nO or nC
Output switch point S1 [N.O./N.C.]
0...50 Switch-on delay switch point S1 [s]
0...50
Switch-off delay switch point S1 [s]
1, 2, 4, 8 Average value [s]
0...30 Selection of glycol contents in 5-%-Steps
Display correction [+/-25 %]
0...255 Modification of access codes
If flow rate monitoring is selected for S1
Adjustable range for S1 [l/min]: depending on device (s. page 10)
< 100 mA
Hysteresis for S1 [l/min]: depending on device (s. page 10)
PNP, NO/NC
If temperature monitoring is selected for S1
progr.
< 200 mA
Adjustable range for S1:
4...20 mA
Hysteresis for S1:
200...500 Ω
-10...90 °C
0...50 s
0...50 s
6...10 s
1...8 s
PBT
www.turck.de/products/
-9...+90 °C
1...10 °C
7