Stopping The Appliance - Amibot glass AG31 Manuel D'utilisation

Operating the appliance

Stopping the appliance

When the appliance stops its cleaning cycle, it returns to its starting
point and beeps.
The robot's cleaning cycle can be interrupted by pressing on the Stop
button on the remote control (4). The appliance stops where it is.
Removing the robot from the glazed surface
Take hold of the robot's handle and press the Start/Pause button (1)
for around 2 seconds so the suction fan stops. AMIBOT can then be
removed from the window safely.
Switching off the robot
For security
appliance must be switched off
and unplugged when not in use.
11
EN
measures, the