Starting The Appliance - Amibot glass AG31 Manuel D'utilisation

EN
Operating the appliance
Before the robot starts a cleaning cycle, ensure that the safety tether
(2) is attached. Insert the connector (3) into the robot and lock it in by
turning it to the right (Figure 1). Fasten the karabiner (1) to a secure
place to catch the robot in case of a fall (Figure 2).
NOTE: The robot could fall due to a power outage of more than 30 min (AMIBOT
Glass back-up battery life).

Starting the appliance

Product diagram
1
2
1. Robot Start/Pause button
2. Top indicator light
Plugging the appliance into the electrical power supply
The robot is plugged in correctly when the Start/Pause button indi-
cator light (1) is green. AMIBOT Glass AG31 is secure when the upper
indicator light (2) is green.
NOTE: Do not unplug the appliance while in use because it could fall.
3
4
3. Start button
4. Stop button
5. Pause button
8
5