Stage XPD1 Wireless System (Optional)
On the wireless handheld transmitter,
unscrew the bottom section of
the microphone by turning it
Plug the RXD1 USB receiver into
counterclockwise and then slide it off.
the Channel 4 USB jack labeled
Place a fresh set of AA (LR6) batteries
WIRELESS.
in the transmitter battery holder,
taking care to observe the polarity
markings, then replace the cover.
Turn the channel 4 LEVEL knob
Turn on the power to the transmitter
on the XP1000 completely
by pressing and holding Power switch;
counterclockwise to 0, then turn the
the indicator LED will light amber.
POWER siwtch on the XP1000 to the
ON position.
18