Samson EXPEDITION XP1000 Manuel Du Propriétaire page 16

XP1000 Quick Start
9. If you notice that the LIMITER indicator is lighting constantly, turn the MASTER
volume down so that the indicator only lights occasionally during loud hits.
10. To add depth to the mix or smooth out the vocals, you can apply effects such as
reverb to channels 1–4. To do this, press the EFFECTS button on the channel(s) to
which you would like to add the effect.
11. Slowly turn up the effects SEND knob until the desired sound is reached.
12. To alter the tonal characteristic of the signal, you can adjust the LOW
(bass) and HIGH (treble) controls. If you find the audio too muddy, you
may want to reduce the LOW control. If you find that the audio sounds
dull, you can increase the HIGH control. There is no right or wrong way
to EQ a sound. You should listen to how the mix sounds in the room and
fine-tune to your liking.
16