IMEON ENERGY HV Notice De Montage Et Guide De Montage page 51

IMEON HV
Step 7: Connect the positive connector (+) to the « BAT+ » input of the inverter.
Connect the negative connector (+) to the « BAT- » input of the inverter.
5.6.2. Communication cable connection

Insert the communication cable (RJ45 type) through the BMS/Meter cable gland.

Respect the below pin map to establish the communication between the battery and the inverter.

The communication cable must be plugged to the « BMS » port of the inverter.

The other side of the communication cable must be plugged to the « CAN » port of the battery.

Screw the BMS /Meter gland.
IMEON HV – Guide d'installation / Installation guide – Rev A.4
FR
EN
FR
51