Vulcan GH Serie Manuel D'installation Et D'utilisation page 15

CONTROLS (Fig. 19)
RANGE TOP BURNER
VALVE KNOB
OVEN BURNER VALVE KNOB
RED IGNITION BUTTON
THERMOSTAT CONTROL DIAL
ON-OFF SWITCH
(CONVECTION OVENS ONLY)
THERMOSTAT CYCLING LIGHT
(CONVECTION OVENS ONLY)
When opened, allows gas to flow to the range section. To
open valve, turn knob counterclockwise. To close valve, turn
knob clockwise.
When opened, allows gas to flow to the oven burner. To open
valve, turn knob counterclockwise. To close valve, turn knob
clockwise.
Used to ignite the oven pilot. To operate, push button in and
follow pilot lighting instructions.
Used to regulate the amount of heat needed to cook a
product. The thermostat dial's temperature range is from
150°F to 500°F (65°C to 260°C). Turn dial counterclockwise
to increase temperature and clockwise to decrease
temperature.
To turn power on, push switch to the ON position. When switch
light illuminates, power is being transmitted to the unit.
When lit, indicates that the thermostat is calling for
heat. When thermostat reaches the dial set
temperature, the light will automatically shut off.
Fig. 19
– 15 –