Yakima ForkLift Instructions De Montage page 5

REMOVE THE KNOB FROM THE SKEWER.
Open the handle.
INSTALL SKEWER.
Skewer direction is your choice:
Consider lock access.
Remove front wheel and load your bike.
Tuck wheelstrap into the
slot to make way for the tire.
1033615D-5/24
Insert the shaft into
the ForkLift as shown.
Set bicycle forks vertically onto skewer.
BE SURE FORKS ARE FULLY SEATED!
With lever open,
tighten adjustment
knob clockwise until
the lever closes with
FIRM resistance.
Unscrew the knob.
CLOSE THE LEVER.
FIRM RESISTANCE against the forks.
Screw the knob back
on leaving enough
space for the bike fork.
Prevent damage
to your forks!
It should close with
Your bike's forks
are secure oNlY
after the lever
closes with SolID
RESISTANCE.