Package Contents; Description (Fi G. 1, 2) - DeWalt DCD732 Traduction De La Notice D'instructions Originale

ENGLIS H
Labels on Charger and Battery Pack
In addition to the pictographs used in this manual,
the labels on the charger and the battery pack show
the following pictographs:
Read instruction manual before use.
See Technical Data for charging time.
Battery charging.
100%
Battery charged.
100%
Battery defective.
Hot/cold pack delay.
Do not probe with conductive objects.
Do not charge damaged battery packs.
Do not expose to water.
Have defective cords replaced
immediately.
Charge only between 4 ˚C and 40 ˚C.
Only for indoor use.
Discard the battery pack with due care for
the environment.
Charge D WALT battery packs only with
E
designated D WALT chargers. Charging
E
battery packs other than the designated
D WALT batteries with a D
E
may make them burst or lead to other
dangerous situations.
Do not incinerate the battery pack.
40

Package Contents

The package contains:
1 Drill/driver or 1 drill/driver/hammerdrill
1 Charger
2 Li-Ion battery packs (M2, L2, C2, P2 models)
3 Li-Ion battery packs (M3, L3, C3, P3 models)
1 Li-Ion battery pack (M1, L1, C1, P1 models)
1 Kitbox
1 Instruction manual
1 Exploded drawing
NOTE: Battery packs, chargers and kitboxes are not
included with N-models.
• Check for damage to the tool, parts or
accessories which may have occurred during
transport.
• Take the time to thoroughly read and
understand this manual prior to operation.
Description (fi g. 1, 2)
a. Trigger switch
b. Forward/reverse control button
c. Torque adjustment collar
d. Gear shifter
e. Worklight
f. Keyless chuck
g. Belt hook
h. Mounting screw
i. Bit clip
j. Battery pack
k. Battery release button
l. Fuel gauge button
INTENDED USE
These drills/drivers/hammerdrills are designed
WALT charger
E
for professional drilling, percussion drilling and
screwdriving applications.
DO NOT use under wet conditions or in presence of
flammable liquids or gases.
These drills/drivers/hammerdrills are professional
power tools.
DO NOT let children come into contact with the
tool. Supervision is required when inexperienced
operators use this tool.
WARNING: Never modify the power
tool or any part of it. Damage or
personal injury could result.