Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Liens rapides
OPERATING MANUAL
PARTS LIST
Examine box contents, then proceed with following instructions.
Locking Drawer Assembly
Bottom Tray
TOOLS NEEDED
Rubber Mallet
• It is the responsibility of the owner to make sure all personnel read this manual prior to using the device. It is also the responsibility
of the device owner to keep this manual intact and in a convenient location for all to see and read. If the manual or product labels are
lost or not legible, contact Sunex Tools ® for replacements. If the operator is not fluent in English, the product and safety instructions
shall be read and discussed with the operator in the operator's native language by the purchaser/owner or his designee, making
sure that the operator comprehends its contents. • Read and follow all instructions in User's Manual. • Do not load carts beyond
rated capacity of 350 lbs. (175 lbs. per shelf). • Lock lid and drawers before moving. • Apply brake on locking casters anytime cart
is in place. • Do not pull cart. Push from handle on end to move. • Units can tip or fall causing damage or personal injury. • Do not
stand on or step in drawers. • Do not open more than one loaded drawer at a time. • Cart is designed to roll easily on flat surfaces
and should not be used on uneven or inclined surfaces. • Keep children away from unit. • Wear gloves when lifting by edges.
• Failure to heed these warnings may result in personal injury and/or property damage.
WARNING: This product can expose you to chemicals including nickel, which is known to the State of California to cause cancer
and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
8013ADELUXE, 8013ABKDELUXE, 8013ABLDELUXE
8013ADELUXE, 8013ABKDELUXE, 8013ABLDELUXE
Chrome Legs (2)
(With Inserts Installed)
Drawer Handle
Screws (14)
Long Drawer
Handle (1)
Short Drawer
Handles (4)
Phillips® Head
6mm Wrench
Screwdriver
WARNING
SERVICE CART WITH LOCKING TOP & DRAWERS
INCLUDES PRY BAR HOLDER AND SIDE WORK BENCH
Pry Bar Holder
Non-Locking Casters (2)
Table or Workbench
1
Side Work Bench
Keys
(Attached
to Legs)
Locking Casters (2)
M6x42 Bolts, Nuts,
& Washers (8 Pcs. Each)
2 People
© Copyright 2019, SunexTools
rev. 09/10/19
®
Publicité
Table des Matières
Manuels Connexes pour Sunex Tools 8013ADELUXE
Sommaire des Matières pour Sunex Tools 8013ADELUXE
- Page 1 If the manual or product labels are lost or not legible, contact Sunex Tools ® for replacements. If the operator is not fluent in English, the product and safety instructions shall be read and discussed with the operator in the operator's native language by the purchaser/owner or his designee, making sure that the operator comprehends its contents.
- Page 2 Locking Drawer Assembly. Tighten bolts until parts fit together firmly. Repeat steps 1 and 2 for other end of cart, using remaining side accessory. Table or workbench Pry Bar Holder 8013ADELUXE, 8013ABKDELUXE, 8013ABLDELUXE rev. 09/10/19...
- Page 3 Repeat with other casters. Ensure that both locking casters NOTE are on the same end of the cart. Once casters are installed, stand cart upright. Assembly is complete. 8013ADELUXE, 8013ABKDELUXE, 8013ABLDELUXE rev. 09/10/19...
-
Page 4: Parts Breakdown
Lock & Key Set, Keyed Alike (2 pc.) 8011BL Blue Pry Bar Holder RS1110 EVA Foam for Trays (10-pk.) 8004 Red Side Work Bench RS1111 EVA Foam for Drawers (10-pk.) 8004BK Black Side Work Bench 8004BL Blue Side Work Bench Locking Lid 8013ADELUXE, 8013ABKDELUXE, 8013ABLDELUXE rev. 09/10/19... -
Page 5: Herramientas Requeridas
Si el manual o las etiquetas se hayan perdido o no sean legibles, comuníquese con Sunex Tools ® por algunos repuestos. Si el operador no domina el idioma inglés, las instrucciones del producto y de seguridad le serán leídas y discutidas con el operador en el idioma materno del operador por parte del comprador/... -
Page 6: Instrucciones De Ensamblado
Repita los pasos 1 y 2 para el otro extremo del carrito, usando el accesorio lateral restante. Mesa o banca de trabajo Sujetador de la barra de apalancamiento 8013ADELUXE, 8013ABKDELUXE, 8013ABLDELUXE rev. 09/10/19... - Page 7 Repita los pasos con las demás rodajas. Asegúrese que ambas rodajas de NOTA seguridad estén del mismo extremo del carrito. Una vez que estén instaladas las rodajas, coloque el carrito en posición vertical. El ensamblado está terminado. 8013ADELUXE, 8013ABKDELUXE, 8013ABLDELUXE rev. 09/10/19...
-
Page 8: Chariot De Service Avec Dessus Et Tiroirs Verrouillants
Si le manuel ou les étiquettes du produit sont perdus ou illisibles, contactez Sunex Tools ® pour les faire remplacer. Si l'utilisateur-opérateur de l'appareil ne maîtrise pas bien l'anglais, les instructions relatives au produit et aux mesures de sécurité... - Page 9 Serrez les boulons jusqu’à ce que les pièces s’adaptent ensemble fermement. Répétez les étapes 1 et 2 pour l’autre extrémité du chariot, utilisez l’accessoire latéral restant. Table ou établi Support de barre de levier 8013ADELUXE, 8013ABKDELUXE, 8013ABLDELUXE rev. 09/10/19...
- Page 10 Répétez avec les autres roulettes. Assurez-vous que les deux roulettes REMARQUE de blocage sont sur la même extrémité du chariot. Une fois que les roulettes sont installées, mettre le chariot à l’endroit. L’assemblage est complété. 8013ADELUXE, 8013ABKDELUXE, 8013ABLDELUXE rev. 09/10/19...