Télécharger Imprimer la page

Sunex Tools 8045 Manuel D'utilisation

Chariot de service robuste à 5 tiroirs

Publicité

Les langues disponibles

Les langues disponibles

Liens rapides

OPERATING MANUAL
OPERATING MANUAL
Read and follow all instructions in User's Manual. It is the responsibility of the owner to make sure all personnel
read this manual prior to using the device. It is also the responsibility of the device owner to keep this manual intact
and in a convenient location for all to see and read. If the manual or product labels are lost or not legible, contact
Sunex Tools
read and discussed with the operator in the operator's native language by the purchaser/owner or his designee,
making sure that the operator comprehends its contents.
PARTS LIST
PARTS LIST
Examine box contents, then proceed with following instructions.
Locking Drawer
Assembly
Bottom Tray
WARNING
Read and follow all instructions in User's Manual. • Do not load
carts beyond rated capacity (500 lbs.). • Lock lid and drawers before
moving. • Apply brake on locking casters anytime cart is in place.
• Units can tip or fall causing damage or personal injury. • Cart is
designed to roll easily on flat surfaces and should not be used on
uneven or inclined surfaces. • Do not open more than one
loaded drawer at a time. • Do not stand on or step in drawers. • Keep
children away from unit. • Wear gloves when lifting edges. • Failure
to heed these warnings may result in personal injury and/or property
damage.
WARNING: This product can expose you to chemicals including
nickel, which is known to the State of California to cause cancer and
birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov.
8045/8045BK/8045BL
for replacements. If the operator is not fluent in English, the product and safety instructions shall be
®
Chrome Legs
Side Work
Bench
Pry Bar
Holder
MODEL 8045 / 8045BK / 8045BL
HEAVY DUTY 5 DRAWER SERVICE CART
INCLUDES PRY BAR HOLDER AND SIDE WORK BENCH
Keys
Non-Locking Casters (2)
(Attached to Legs)
Liners
M6x40 Bolts, Washers, & Nuts
(8 Pcs. Bolts and Nuts, 16 Washers)
TOOLS NEEDED
Rubber Mallet
Table or Workbench
Locking Casters (2)
Long Drawer
Handle (2)
Short Drawer
Handles (4)
(2)
(2)
(2)
(1)
Drawer Handle
Screws (12)
Phillips Head
10mm Wrench
Screwdriver
2 People
© Copyright 2018, Sunex Tools
Rev 06/04/18
®

Publicité

loading

Sommaire des Matières pour Sunex Tools 8045

  • Page 1 MODEL 8045 / 8045BK / 8045BL HEAVY DUTY 5 DRAWER SERVICE CART INCLUDES PRY BAR HOLDER AND SIDE WORK BENCH OPERATING MANUAL OPERATING MANUAL Read and follow all instructions in User's Manual. It is the responsibility of the owner to make sure all personnel read this manual prior to using the device.
  • Page 2 Secure bolts with a flat washer, lock washer, and nut on inside of Locking Drawer Assembly. Tighten bolts until parts fit together firmly. Repeat steps 1 and 2 for other end of cart, using remaining side accessory. Pry Bar Table or Holder Workbench 8045/8045BK/8045BL Rev 06/04/18...
  • Page 3 Using a rubber mallet, hammer the casters into place until the stem is no longer visible. Repeat with other casters. Ensure that both locking casters NOTE are on same end of the cart. Once casters are installed, stand cart upright. Assembly is complete. 8045/8045BK/8045BL Rev 06/04/18...
  • Page 4 MODEL 8045 / 8045BK / 8045BL HEAVY DUTY 5 DRAWER SERVICE CART INCLUDES PRY BAR HOLDER AND SIDE WORK BENCH PARTS BREAKDOWN OPERATING MANUAL ALSO AVAILABLE: PART # Description RSRBSLIDEC2 Clip-On Roller bearing Slide/pr. RS1110 EVA Foam for Trays/10 PK.
  • Page 5 MODELO 8045 / 8045BK / 8045BL CARRITO DE SERVICIO PARA SERVICIO PESADO 5 CAJONES SE INCLUYE UN SUJETADOR PARA BARRA DE APALANCAMIENTO Y UN BANCO DE TRABAJO LATERAL MANUAL DE OPERACIÓN Lea y comprenda todas las instrucciones. Hacer caso omiso al seguir todas las instrucciones alistadas a continuación podría ocasionar el choque eléctrico, incendio, explosiones y/o lesiones personales serias.
  • Page 6 Apriete los pernos hasta que las piezas se encajen firmemente. Repita los pasos 1 y 2 para el otro extremo del carrito, usando el accesorio lateral restante. Sujetador de Mesa o banca la barra de de trabajo apalancamiento 8045/8045BK/8045BL Rev 06/04/18...
  • Page 7 árbol ya no esté visible. Repita los pasos con las demás rodajas. Asegúrese que ambas rodajas de seguridad estén del mismo NOTA extremo del carrito. Una vez que estén instaladas las rodajas, coloque el carrito en posición vertical. El ensamblado está terminado. 8045/8045BK/8045BL Rev 06/04/18...
  • Page 8 MODÈLE 8045 / 8045BK / 8045BL CHARIOT DE SERVICE ROBUSTE À 5 TIROIRS COMPREND UN SUPPORT DE BARRE DE LEVIER ET UN ÉTABLI LATÉRAL MANUEL D’UTILISATION Veuillez lire et bien comprendre toutes les instructions. Tout manquement aux instructions indiquées ci-après pourrait entraîner un choc élec- trique, un incendie, une explosion et/ou des blessures personnelles graves.
  • Page 9 à l’intérieur de l’assemblage de barrure de tiroir. Serrez les boulons jusqu’à ce que les pièces s’adaptent ensemble fermement. Répétez les étapes 1 et 2 pour l’autre extrémité du chariot, utilisez l’accessoire latéral restant. Support de Table ou barre de levier établi 8045/8045BK/8045BL Rev 06/04/18...
  • Page 10 Répétez avec les autres roulettes. Assurez-vous que les deux REMARQUE roulettes de blocage sont sur la même extrémité du chariot. Une fois que les roulettes sont installées, mettre le chariot à l’endroit. L’assemblage est complété. 8045/8045BK/8045BL Rev 06/04/18...

Ce manuel est également adapté pour:

8045bk8045bl