Safety Notes; Important Notes; Functions; Spare Parts - marklin H0 43252 Mode D'emploi

Safety Notes

• This car is to be used only with an operating system
designed for it (Märklin AC, Märklin Delta,
Märklin Digital or Märklin Systems).
• Use only switched mode power supply units and trans-
formers that are designed for your local power system.
• This car must never be supplied with power from more
than one transformer.
• Pay close attention to the safety notes in the
instructions for your operating system.
• Do not expose the model to direct sunlight, extreme
changes in temperature, or high humidity.
• WARNING! Sharp edges and points required for operation.

Important Notes

• If this car is not used in the D 475 (43204) train consist, the
72020 current-conducting coupler must be replaced by
the 7203 coupler. Contact with metal couplers will cause
a short circuit!
• Only the pickup shoe on the 43252 car may be used when
the car is part of a train consist with current-conducting
couplers or couplings. The pickup shoe on the car from
the 43204 set must be removed.
• The 7203 coupler must be used at the end and beginning
of a train consist with. Danger of short circuit!
• The operating instructions and the packaging are a com-
ponent part of the product and must therefore be kept as
well as transferred along with the product to others.
• Please see your authorized Märklin dealer for repairs or

spare parts.

6
• The warranty card included with this product specifies
the warranty conditions.
• Disposing: www.maerklin.com/en/imprint.html

Functions

• Recognition of the mode of operation: automatic.
• Addresses that can be set:
1-80 (Control Unit 6021/Mobile Station 60651/652)
1-255 (Central Station 6021x/Mobile Station 60653)
• Address set at the factory: 78
• Mfx technology for the Mobile Station / Central Station.
Name set at the factory: DSG Schlafwagen
• Setting the parameters (address, volume):
with the Control Unit, Mobile Station, Central Station.
• Various controllable functions.
• Only the interior lighting for the "Corridor" is available in
analog operation.