"Time" Button; Instructions For Operation - Ribimex RIBITECH PRSPOTSOL9 Manuel D'instructions Et D'utilisation

4.4- Motion Detector Adjustment (only for models WITH detector)
a) "SENS" button
Allows to adjust the detection sensitivity and limit any
unwanted triggering.
Optimum sensitivity can be achieved by positioning the
"SENS" button in the middle and then turning it in the "+"
direction to increase the detection distance (up to 12 meters) or
the "-" direction to decrease the sensitivity detection distance
(up to 4 meters).
b) "TIME" button
The "TIME" button is used to control the duration of the
lighting once movement has been detected.
Turn the "TIME" knob in the "+" direction to increase the
lighting time (up to about5 min) and "-" to decrease the
lighting time (to approx. 3 seconds).
c) "LUX" button
The "LUX" button determines the lighting level from which the detector begins to operate.
Turn the "LUX" button to the moon symbol (semi-dark) position or sun symbol (day light).
In this temporary setting mode, the motion sensor remains inactive during the day.
At nightfall, when you think the desired brightness level is reached, simply set the "LUX" button to the
position from which the motion detector will activate.
The detector will always activate at nightfall as soon as the desired brightness level is reached.
V. OPERATION
5.1- Intended use
- The product is intended for private household uses (e.g. in the house, in the garage or in the garden).
- The product is suitable for interior and exterior lighting.
- Do not use the product for unintended applications.
- Do not use the product for artisanal, industrial, professional and / or commercial applications (e.g. in
construction sites, public parks, sports fields...).

5.2- Instructions for operation

Mount product at desired location, allowing the solar panel maximum exposure to directly sunlight.
Switch on the product (through switch (11)).
Do NOT direct the light beam directly to the eyes or face (whether people and / or animals).
To limit glare and excessive light to others (people and homes), DO NOT direct the light beam beyond the
perimeter of your home. Do not direct the light beam towards surrounding dwellings.
Note: use of floodlights is not permitted if inclined more than 15 degrees above the horizon or, if the
inclination is greater than that angle, the floodlight shall be fitted with internal or external visors so as to
respect the proportion of light emitted above the horizon.
Page 15 / 19