Starway modena Manuel De L'utilisateur page 51

NFORMATION
Time.Info
CurrentTime: Display of the usage time (in hours) since the last power on
TotalTime: Display of the usage time (in hours) since the first power-up.
LastTime: Display of the usage time (in hours) since the last reset.
Time PIN: To access the reset of usage times you must enter a PIN code:
050 to reset the "Last Time"
060 to reset the "TotalTime"
ClearLast: ON / OFF to reset
ClearTOTAL: ON / OFF to reset
Temp.Info
- Temperature display
xxx F or C - Temperature display
Fan Speed
- Fan speed display
Fan : xxx RPM
Error.Info
- Display of the last 10 error messages.
Model.Info
- Display of model name : MODENA
Software.V
- Display of the version of the various processors
1U01 - Vx.x.x
2U01 - Vx.x.x
3U01 - Vx.x.x
4U01 - Vx.x.x
5U01 - Vx.x.x
6U01 - Vx.x.x
MENU TEST
Reset Motors
ALL : Reset of all motors
Pan&Tilt : Reset of Pan and Tilt motors
Head : Zoom reset
Test.Channel
Sub-menu allowing you to test all Modena parameters such as:
Pan, Pan Fine, Tilt, Tilt Fine, Red, Red Fine, Green, Green Fine, Blue, Blue Fine, White, White Fine, Strobe, Dimmer, Dim
Fine, Zoom, DimMode, P/T Speed, Reset/Prog
Panel.Ctrl.
Submenu allowing manual control of all Modena parameters such as:
Pan, Pan Fine, Tilt, Tilt Fine, Red, Red Fine, Green, Green Fine, Blue, Blue Fine, White, White Fine, Strobe, Dimmer, Dim
Fine, Zoom, DimMode, P/T Speed, Reset/Prog
Calibrate :
Sub-menu allowing to recalibrate the motors and the LEDs
To access this menu you must enter the PIN code to unlock this function.
Pin Code: 050
This gives you access to the following parameters:
Pan, Pan Fine, Tilt, Tilt Fine, Red, Red Fine, Green, Green Fine, Blue, Blue Fine, White, White Fine, Strobe, Dimmer, Dim
Fine, Zoom.
Page 51