Display Mode - DNT MusicFly SD Mode D'emploi

Description & Functions
Volume
This function is available only, if a memory device
is connected to the USB port or SD card slot.
Press 2 x briefly the MENU button.
The display shows a bar (7 levels).
Set the volume with the
Equalizer setting
This function is available only, if a memory device
is connected to the USB port or SD card slot.
Setup bass
Press 3 x briefly the MENU button
The display briefly shows bAS and then switches to the
current value.
Setup a valuy between +-5 with the
Press the MENU button once again.
Setup treble
Press 4 x briefly the MENU button
The display briefly shows tre and then switches to the cur-
rent value.
Setup a valuy between +-5 with the
Press the MENU button once again.
Dynamic sound
Press 5 x briefly the MENU button
The display briefly shows the current value dyn or noa.
Press the
Press the MENU button once again.

Display mode

The display shows remaining playback time only,
if a memory device is connected to the USB port
or SD card slot.
During playback press
The display is changed in the following order:
/ buttons to select the desired sound
- 20 -
/
buttons.
/
/
button for 2 seconds.
buttons.
buttons.