Servicing & Repair; Fuse Replacement - Sunoptics Surgical LED 50 Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

9. SERVICING AND REPAIR
Defective items of equipment are to be serviced and repaired exclusively by persons
authorized by the manufacturer. All repair work shall employ original manufacturer's parts
only.

9.1 FUSE REPLACEMENT

CAUTION
Always disconnect power cord and turn main switch off before fuse
replacement.
Turn light source off and unplug power cord. On back of unit remove fuse by turning fuse
cover and pulling out fuse. Replace fuse with 2 AMP (1/4" x 1 ¼") time delay 250V rated
fuse. Insert back into fuse housing.
Re-connect the power cord and turn the LED light source on according to section 6.1.
9.2 LIMITED WARRANTY
Your LED light source carries a 3-years warranty from the date of shipment on
workmanship and all defects of material, excluding replaceable sweatbands, headband,
fiberoptic cable and lamps. Should your product prove to have such defects within 3 years
of the shipment. Sunoptic Technologies
part without charge. Should your LED Light Source product(s) need servicing under this
warranty, please contact, Sunoptic Technologies
You should carefully pack unit in a sturdy carton and ship it to the factory. Please include a
note describing the defects, your name, telephone number and a return address. Warranty
does not cover equipment subject to misuse, accidental damage, normal wear and tear or if
transferred to a new owner without authorization from, Sunoptic Technologies
warranty gives you specific legal rights and you may also have other rights that vary from
state to state.
POST WARRANTY REPAIRS: You may return your product(s) for repair, shipping prepaid to
the factory. Your product will be inspected and an estimate of repair charges will be submitted
to you for approval. Payment must be received before repairs are completed.
In the US:
FAX number:
Customer Service
LIT158 SUNOPTICS SURGICAL
(English)
will repair or replace the product or component
®
®
877-677-2832 (toll free)
904 733-4832
904-737-7611
®
return authorization documentation.
Rev. B
Date of Revision:07/15/14
Page 11 of 65
This
®

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ssl-050

Table des Matières