Safety Instructions - Uniteck UNIFIX 100S Instructions D'utilisation

EN
UNIFIX 100S / 150S / 200S
RECOMMENDATIONS
Mount Unifix brackets only on surfaces with sufficient bearing capacity. Consider the additional load with
the panel:
Support
Unifix 100S = 3,8 kg
Unifix 150S =6,2kg
Unifix 200S = 9,8kg
Fastening: to prevent large quantities of snow from accumulating behind the sensor, install appropriate
barrier grids.
The position of the solar panel influences your electrical production. Choose the most optimal inclination
and orientation to suit your environment. Avoid shaded areas or objects that are a source of shadow (eg
tree)
Before attaching and connecting, please observe:
• the maximum distances between each element shown below.
•
connecting order

SAFETY INSTRUCTIONS

• Take the appropriate mesures to prevent accidents during your mounting steps.
•
If the bracket and the mounting tools are exposed to sunlight for a long period, there is a risk
of getting burnt. Make sure to protect yourself accordingly.
•
When finished, check and ensure that all of your brackets and panels are fixed properly.
8
Unisun 80.12M / 100.12M / 100.24M /
110.12BC
Unisun 150.12M / 150.12BC
Unisun 200.24M
www.uniteck.fr
Panneau
=6.3kg / 7,5kg / 7,5.kg /
7,0.kg
=9,8kg / 9,3kg
=13,6kg