Uniteck UNIFIX 100S Instructions D'utilisation page 9

UNIFIX 100S / 150S / 200S
Recommended Tightening torque
screw Torque
M5 5,10
M 6 Nm 8,80
Nm
M 8 21,50
Nm
M 10 44,00
Nm
Nb. Average friction coefficient µ=0,20 / Tightening at 50% of the elastic limit.
• For mounting on the masthead (not used on UNIFIX 200S), you can use the upper cap to relieve
the weight of the installation so that the mounting can be easily done alone, without extra
assistance. The bracket is fixed with the 4 M8 Screws
NB: This piece isn't indispensable to fix the solar panels. It's only meant for the
assembly.
• Position the solar panels on your arch with the flanges (Screw and torque M8 or M10 aren't
provided).
www.uniteck.fr
EN
9