Safety Instructions - Uniteck UNIFIX 100.1WB Mode D'emploi

DESCRIPTION
Dear customer, thank you for purchasing one of our Uniteck products. Please read all instructions carefully
before using your product.
The Unifix 100.1 WB mounting bracket is especially designed to fix your Unisun 50.12M / 55.12BC /
80.12M / 100.12M / 50.12BC / 110.12BC photovoltaic panel on your boat/yacht.
It can be fixed on all balconies or handrails with tube of diameter from 22 to 28 mm (minimum lenght
of the tube : 170 mm).
Thanks to their structure and their marine inox fastening, they are perfectly adapted to be used in saline
environment.
Adjustable, the Unifix 100.1 WB mounting brackets allows you to increase your energy production from
20 to 50% compared to a standard fixed installation.

SAFETY INSTRUCTIONS

• Take appropriate measures to prevent accidents during assembly work.
• If the panel and support are exposed to sunlight for a long period of time, there is a risk of
burns. Protect yourself.
• At the end of the work, check that your supports and panels are firmly attached.
RECOMMENDATIONS
• Mount the Unifix brackets only on balconies or handrails with sufficient bearing capacity. Take
into account the additional load with panel:
- 50W installation: Unifix 100.1 WB (3,0 kg) + Unisun 50.12M (4,1kg) : 7,1 kg
- 50W installation: Unifix 100.1 WB (3,0 kg) + Unisun 55.12BC (3,8kg) : 6,8 kg
- 80W installation: Unifix 100.1 WB (3,0 kg) + Unisun 80.12M (6,3kg) : 9,3 kg
- 100W installation: Unifix 100.1 WB (3,0 kg) + Unisun 100.12M (7,5kg) : 10,5 kg
- 100W installation: Unifix 100.1 WB (3,0 kg) + Unisun 110.12BC (7kg) : 10,0 kg
• Unifix supports are exclusively intended for fixing Unisun panels.
• The arrangement of the sensors influences your electrical performance. Choose the optimum
tilt and orientation according to your environment. Avoid areas of shade or objects that may
cause shadows.
• For more energy, it is possible to use two solar systems:
- panels with the same orientation: installation in parallel (two panels + one regulator
+ one wiring kit + branch connectors)
- panels with opposite orientations: two separate installations (one panel + one panel
+ one controller + wiring kit) x2
www.uniteck.fr
EN
3/9