Foremost BTS-1005E-W Manuel D'utilisation page 10

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

OPERATING MANUAL/INSTALLATION STEPS
WASH/DRY
• Press to start the posterior wash for 90
seconds, then dry for 4 minutes.
• If pressed again during 90 seconds, it will skip
to drying function.
MASSAGE
• While washing, press the button to start the
cycle of cold and warm water.
• Only available when the "POSTERIOR" or
"FEMININE" wasvh function has started.
• Press again to stop the massage.
ON OFF
STOP
WATER
WATER TEMP.
TEMP.
• Shows the current temperature when pressed
once.
• Press again to change the temperature.
• Default temperature is MEDIUM.
• Switch the display to [LOW], [MED], [HIGH],
[OFF].
To restore to factory settings:
• If there is a confusion (higher water temperature, lower seat temperature, weaker spray strength) while using,
please unplug the seat for 1 minute, then reconnect it. The water temperature, seat temperature, drying temp.
and spray strength, nozzle position will restore to middle level settings.
JULY 2020
FOREMOST INTERNATIONAL LTD. (CANADA): 5970 Chedworth Way, Unit B, Mississauga, Ontario, Canada L5R 4G5 - 1-888-256-7551 www.foremostcanada.com
FOREMOST GROUPS INC. (U.S.A.): 6241 Northwind Parkway, Hobart, IN, USA 46342 - 1-888-620-3667 www.foremostbath.com
STEP-BY-STEP ILLUSTRATED
Massa Intelligent Bidet Seat
OPERATION & FUNCTIONS
FEMININE
POSTERIOR
+
SPRAY INTENSITY
/
SEAT TEMP.
• Shows the current temperature when pressed
once.
• Press again to change the temperature.
• Default temperature is MEDIUM.
• Switch the display to [LOW], [MED], [HIGH],
[OFF].
Dry
DRY
• Press to dry the front and rear areas.
• Switch the display of [LOW], [MED], [HIGH], [OFF].
• Stops automatically after 4 minutes.
LIGHTING
• Turn the night light on/off.
WASH DRY
LIGHTING
DRY
SEAT
WATER
TEMP.
TEMP.
NOZZLE POSITION
H
SEAT
TEMP.
MASSAGE
DRY
UV
TEMP.
STERILIZATION
L
DRY
DRY TEMP.
TEMP.
• Shows the current temperature when pressed
once.
• Press again to change the temperature.
• Default temperature is MEDIUM.
• Switch the display to [LOW], [MED], [HIGH],
[OFF].
page 10/15

Publicité

Table des Matières
loading

Produits Connexes pour Foremost BTS-1005E-W

Table des Matières