Aux-In Operation; Usb Operation; Usb Charge; Connecting A Microphone - Sharp PS-929 Mode D'emploi

6
You can control tracks being played back and the volume of the party
speaker on your external device. The functions available when using an
audio playback device on the party speaker will depend on your external
device and the software used.
Press and hold button (for 3sec.) to disconnect the current Bluetooth
connection. The PS-929 will prompt "disconnected".
Then other Bluetooth devices can fi nd and pair with the "SHARP PS-929".

AUX-IN OPERATION

You can use the AUX IN connection to connect an external playback device
(for example a CD player or MP3 player).
– Connect your audio device to the AUX IN JACK on the rear panel of the
unit with an AUX IN cable. (not supplied with the device)
– Press the /MODE button several times until you see AUX in the
display.
The audio signal from your external device will now be played back.
The track being played back is controlled via the external device. The
volume can be controlled both on your external device and the party
speaker.

USB OPERATION

This unit provides two USB ports, one for playback, and another for
charging.
– Insert the USB drive into the USB slot 1 on the rear panel of the party
speaker.
– It will enter to USB mode, the USB will appear on the display. And it
will play the songs from the USB immediately.
– Press or button to select the previous or next track
– Due to the numerous diff erent fi le systems and fi le formats, compatibi-
lity with the connected memory media cannot be guaranteed.
– Depending on the size of the data medium, it may take some time for
the system to be detected.
– The supported fi le format is MP3/WAV/FLAC.
– External hard disks are not supported.
– supports USB memory key up to 128GB.

USB Charge

The unit has a bulit-in 5V 1A charger, to charge an external USB Device:
1. Connect the USB plug from the external USB Device to 5V 1A port on
the top of unit.
2. Power on the main unit, then the charging will automatically start.
Connect guitar
The guitar can be used in any operating mode. To connect the guitar,
proceed as follows:
– Insert the connection cord (6.3 mm cinch) for the guitar into the guitar
plug GT.IN.
– Connect the guitar with the connection cord. Use the MIC/GUITAR
VOL knob to select the desired guitar volume

Connecting a microphone

– Insert the cord of the microphone supplied into the MIC.IN plug on
the rear of the speaker.
– Use the MIC/GUITAR VOL knob to select the desired microphone
volume.
– Long press the EQ/ECHO button to turn on/off echo eff ect.
TWS/ True wireless Stereo - Duo Mode
• This allows for two PS-929 party speakers to be connected together
as a left and right stereo speakers for a real stereo experience. The fi rst
connected speaker is the master one and the second the slave.
• Press and hold the SUPER BASS button on the fi rst speaker until the
speaker says "Duo Mode pairing" then release the buttons.
• Ensure the second speaker is in Blueetooth mode, did not connected to
any devices and ready for pairing.
• Please wait until both speaker says "Duo Mode connected". The speakers
are now connected to each other.
• The speaker that display "BT-L" (left speaker) is the master speaker and
this is the speaker that you should pair with your phone.
• For Bluetooth pairing to a Bluetooth-out enabled smart device search for
"SHARP PS-929" on your device and pair.
• When in Duo Mode and you Power off one speaker both speakers will
power off.
• When you Power on the speakers, they need to be turned on
individually.
• When both speakers are powered on Duo Mode will automatically
reconnect and you will hear "Duo Mode connected".
• To disconnect Duo Mode press and hold SUPER BASS button until you
hear "Duo Mode disconnected"