Warranty Provisions - Proxxon MICROFLAM MFB/E Manuel D'utilisation

Masquer les pouces

Table Des Matières

Table des Matières

Les langues disponibles

With a normal flame a tank filling lasts

approx. 1 hour.

Important!

Before starting work, please make sure that the

locking slide item 11 is pulled up.

Ignition:

1. Turn sleeve of the air control nozzle (4) in such

a way that the bore is half opened.

2. Set gas control lever (5) to "ON". Gas should

now escape with a light hissing sound.

3. Press push button igniter (6).

Important!

The flame is barely visible at level 1. Fire hazard!

If the burner does not ignite, please check to see

if a spark jumps over at the igniter (1) and/or

whether or not the air control nozzle (4) is proper-

ly adjusted.

Adjusting the flame:

1. First set the gas control lever (5) in accordance

with the flame size.

2. Then turn the air control nozzle (4) until the

flame has a pointed form. The flame tempera-

ture is highest in the flame cone and becomes

lower toward the edges. The maximum achiev-

able temperature is approx. 1200°C (2190°F).

Note:

If the flame cannot not be satisfactorily adjusted,

then warm up the gas tank (7) by hand and/or top

up the gas tank.

Important!

Heating up the tank with auxiliary devices is not

permitted. Danger of explosion!

Turn off burner:

1. Set gas control lever (5) to "OFF". Flame must

extinguish.

Once the work is completed, set the gas slide

valve to zero and press the locking slide 11

down. Activation of the ignition button is

stopped and the slide valve for regulating

the gas quantity is blocked at the zero setting.

This is for safety: Accidental activation of the

ignition and turning on the gas supply is thus

prevented.