Haider BIOSWING 350 Mode D'emploi page 14

Arm, Multifunctional (4F)
6
To relieve the strain on your shoulders and neck, the arms can be adjusted in
height. Adjust the height so that you do not feel any tension in the shoulder
area. Furthermore, the armrests can be adjusted to the individual propor-
tions of the upper body in breadth and depth. They can also be turned ac-
cording to the position of the forearm.
Adjustment of Arm in Height
Pull the cord-pull switch
6a
to the desired height and release the cord-pull switch.
Adjustment or Movement of Armrests in Breadth and Depth
While noticing resistance from the catches, push the armrests
ward/leftward or forward/backward. The turn can be adjusted by pushing
the operating element , which is located under the armrest.
6c
(The width of the arms can be adjusted by using the elongated guide with position holes at the
beam holding the arms up. Loosen the screws at the bottom of the seat cushion. Adjust the width
by pulling the arms outward or inward and then tighten the screws firmly.)
6b
6c
6a
upward. At the same time, adjust the armrests
english | 26
Adjustment of Backrest Height
The backrest height can be individually adjusted to the shape of your spi-
nal column.
Adjustment of Backrest Height
While sitting, reach backward with both hands and adjust the backrest
to the desired height by pushing it upward from the lowest point. Please note
that the backrest can be lowered only from the highest position.
right-
6b
7
english | 27
7
7