Haider BIOSWING 350 Mode D'emploi page 13

Adjustment of Seat Depth
4
The adjustment of the seat depth helps you to adjust the seat surface to the
length of your upper leg. Make sure that the front edge of the seat is at a
distance of six inches from the hollow part of the knee.
Individually Adjusted Seat Surface
While sitting, pull the operating element
shift the seat forward and backward by pushing the seat cushion. Then re-
lease the operating element.
4
upward and simultaneously
4
english | 24
Arm, Height adjustable (1F)
To relieve the strain on shoulders and neck, the arms can be adjusted in
height. Adapt the height so that you do not feel any tension in the shoul-
der area.
Adjustment of Arm in Height
Pull the operating element upward. At the same time, adjust the arms
5
at the desired height and then release the cord-pull switch.
(The width of the arms can be adjusted by using the elongated guide with position holes at the
beam holding the arms up. Loosen the screws at the bottom of the seat cushion. Adjust the width
by pulling the arms outward or inward and then tighten the screws firmly.)
5
english | 25
5