Installation Instructions; Unpacking And Examining Your Microwave Oven - Viking Range VMOC206WH Manuel D'utilisation Et D'entretien

INSTALLATION INSTRUCTIONS

Unpacking and Examining Your Microwave Oven

Remove all packing materials from inside the
microwave oven cavity; however, DO NOT
REMOVE THE WAVEGUIDE COVER, which
is located on the top cavity wall. Read
enclosures and SAVE the Installation/Use
and Care Manual.
Check the microwave oven for any damage,
such as misaligned or bent door, damaged
door seals and sealing surfaces, broken or
loose door hinges and latches and dents
inside the cavity or on the door. If there is
any damage, do not operate the microwave oven and contact your dealer or
VIKING AUTHORIZED SERVICER.
Choosing a Location for Your Microwave Oven on the
Counter
You will use the microwave oven frequently so plan its location for ease of use.
It's wise, if possible, to have counter space on at least one side of the micro-
wave oven. Allow at least 2 inches on the
sides, top and at the rear of the microwave
oven for air circulation.
Choosing a Location for Your
Built-in Microwave Oven
Your microwave oven can be built into a
cabinet or wall by itself or above an oven.
To install a microwave oven above a built-in
oven, the applicable trim kits are as follows:
VIKING Professional Series:
• For installation with an electric 27" wide
single oven (VESO176 / VESO177) use
built-in trim kit VMTK275SS.
• For installation with an electric 30" wide single oven (VESO105 / VESO107)
use built-in trim kit VMTK305SS.
• For installation with a gas (VGS0166) or electric (VES0165) 36" wide single
oven use built-in trim kit VMTK365SS.
Do not build in above any other gas or electric oven.
Microwave
oven Front
5
Built-in Trim Kit
Frame Assembly